J9旗舰厅

1、 Equipment name: automatic sand filter, carbon filter and softening pretreatment system

2、 Specification and model: hdnyc-10t

3、 Equipment brand: Wenzhou Haineng wzhdn

4、 Product Description:

Due to the variety of raw water and the complexity of its composition, according to the requirements of the raw water quality and the recovery rate of RO system and other main process design parameters, the appropriate pretreatment process system is selected to reduce the fouling and scaling of RO membrane and prevent the decrease of the desalination rate and water production rate of RO membrane, especially for the current shortage of water sources and the deterioration of water quality, a correct pretreatment is selected The system will directly affect the function of the whole water treatment system. as everyone knows. The failure of RO system is mostly caused by the incomplete function of pretreatment system. In order to ensure the normal reverse osmosis process, the raw water must be treated strictly. Purpose of pretreatment of RO system:

① Remove suspended solids and reduce turbidity;

② Control the growth of microorganisms;

③ To inhibit and control the deposition of micro dissolved salt;

④ Adjustment of inlet water temperature and pH;

⑤ Removal of organic matter;

⑥ Precipitation control of metal oxides and silicon. 　

5. Technical requirements:

1. Tank:

(1) It is usually composed of four layers: inner surface layer, inner layer, strength layer and outer surface layer. Other layered structures can be adopted according to the requirements; the wall thickness of the tank can be changed according to the design requirements.

(2) The resin content of the surface layer and the inner layer of the inner layer of the cylinder varies according to the storage medium.

(3) Cone angle of inner wall is more than 1 °

(4) Under loading conditions, the allowable circumferential strain of tank wall shall not exceed 0.1%

(5) For the filament winding layer, when the spiral winding angle is 80 °, the axial tensile strength shall not be less than 15MPa

2. Head:

(1) The head of vertical storage tank can be ellipsoid, flat and conical, and the upper and lower heads can also be combined in different forms. The head of horizontal storage tank is oval.

(2) The strength layer of the head is mainly spray and hand paste, supplemented by winding envelope: when laying the surface felt, short cut primary color felt and roving cloth, the joints between layers shall be staggered, the width shall not be less than 60mm, the tower connection width shall be 30mm, and the resin quality content shall not be less than 40%

(3) When the vertical storage tank is flat, the radius of the bottom corner shall not be less than 38mm, the thickness of the bottom thickening decrease is tangent to the flat bottom, and the minimum thickness of the corner reinforcement area is the sum of the structural thickness of the cylinder and the head.

3. Support:

(1) The number of saddle supports of horizontal storage tank shall not be less than two, and saddle can also be made of steel, cast iron, concrete or hand pasted fiberglass

(2) The wrap angle of saddle shall not be less than 120 °. The saddle arc shall coincide with the outer wall of storage tank

(3) The distance between any two saddles shall not be greater than 1.5 times the nominal diameter of the cylinder

(4) Flat bottom storage tank adopts flat concrete foundation. Soft cushion or 200mm thick sand cushion on the support

(5) Glass fiber reinforced plastic or resin concrete legs can be used for the storage tank with ellipsoid lower head. The shape of legs and the cushion of glass cylinder should be consistent

(6) Glass steel ring ribs or steel lifting lugs can be added at the connection between the tank bottom and the leg support.

4. Strengthen assistance:

(1) According to the length diameter ratio of the horizontal storage tank, the strengthening AIDS should be selected reasonably, which can be set inside or outside the tank. The saddle part shall be provided with thickened reinforcing AIDS, whose thickness shall not be less than 2 / 1 of the wall thickness and width shall not be less than 1.3 times of the support width.

(2) The open edge of vertical storage tank without top cover shall have horizontal reinforcing rib.

(3) The reinforcing rib is alternately wound on the cylinder with short cutting felt and cloth, and the outer roving is wrapped and compacted. The stiffener can also be a composite of other materials.

5. Exhaust pipe and overflow pipe:

(1) The upper part of the storage tank shall be provided with an exhaust pipe which is freely connected with the atmosphere. The minimum diameter of exhaust pipe shall be larger than that of inlet and outlet pipe.

(2) The storage tank shall be provided with overflow pipe whose diameter shall be larger than the diameter of the feed pipe.

6. Anchorage device:

(1) During the installation and operation of the storage tank, especially the parallel bottom storage tank, it must be equipped with anchorage device fixed on the foundation.

(2) The anchoring device is not fixed on the storage tank.

7. Softening:

(1) The softened water tank is a soft water container which is stored after softening treatment, and its production is the same as the general water supply tank. When the ion exchanger is used to soften the water, the flow rate of the raw water should not be too large in the softening process, and the softened water cannot be produced in the regeneration process after the failure of the exchanger. Therefore, it needs to be stored in the water tank and extracted at any time.

(2) The softened water tank is the softened water for the system, which comes out from the resin exchange tank and enters the softened water tank, and then enters the system by the make-up water pump. Softened water tank is to soften the common hard water by electronic means. Its purpose is to minimize the scale produced by air conditioning pipes, because if there is scale on the pipe wall, it will reduce the efficiency of refrigeration (heat). Especially in winter, it needs to be softened.

It is widely used to soften the make-up water of steam boiler, hot water boiler, exchanger, evaporation condenser, air conditioner, direct fired machine and other systems. It can also be used in hotels, restaurants, office buildings, apartments, home and other domestic water treatment and food, beverage, wine, laundry, printing and dyeing, chemical industry, medicine

And other industries.

7、 Equipment features:

◇ automation of water softening process:

The equipment realizes the automation of ion exchange and resin regeneration process through the program control device.

◇ efficient:

The design of the water softener is reasonable, so that the effective exchange capacity of the resin can be brought into full play.

◇ provincial labor:

It is easy to install without special personnel.

◇ non toxic:

The valve body is lead-fre3E

2、 Specification and model: hdnyc-10t

3、 Equipment brand: Wenzhou Haineng wzhdn

4、 Product Description:

Due to the variety of raw water and the complexity of its composition, according to the requirements of the raw water quality and the recovery rate of RO system and other main process design parameters, the appropriate pretreatment process system is selected to reduce the fouling and scaling of RO membrane and prevent the decrease of the desalination rate and water production rate of RO membrane, especially for the current shortage of water sources and the deterioration of water quality, a correct pretreatment is selected The system will directly affect the function of the whole water treatment system. as everyone knows. The failure of RO system is mostly caused by the incomplete function of pretreatment system. In order to ensure the normal reverse osmosis process, the raw water must be treated strictly. Purpose of pretreatment of RO system:

① Remove suspended solids and reduce turbidity;

② Control the growth of microorganisms;

③ To inhibit and control the deposition of micro dissolved salt;

④ Adjustment of inlet water temperature and pH;

⑤ Removal of organic matter;

⑥ Precipitation control of metal oxides and silicon. 　

5. Technical requirements:

1. Tank:

(1) It is usually composed of four layers: inner surface layer, inner layer, strength layer and outer surface layer. Other layered structures can be adopted according to the requirements; the wall thickness of the tank can be changed according to the design requirements.

(2) The resin content of the surface layer and the inner layer of the inner layer of the cylinder varies according to the storage medium.

(3) Cone angle of inner wall is more than 1 °

(4) Under loading conditions, the allowable circumferential strain of tank wall shall not exceed 0.1%

(5) For the filament winding layer, when the spiral winding angle is 80 °, the axial tensile strength shall not be less than 15MPa

2. Head:

(1) The head of vertical storage tank can be ellipsoid, flat and conical, and the upper and lower heads can also be combined in different forms. The head of horizontal storage tank is oval.

(2) The strength layer of the head is mainly spray and hand paste, supplemented by winding envelope: when laying the surface felt, short cut primary color felt and roving cloth, the joints between layers shall be staggered, the width shall not be less than 60mm, the tower connection width shall be 30mm, and the resin quality content shall not be less than 40%

(3) When the vertical storage tank is flat, the radius of the bottom corner shall not be less than 38mm, the thickness of the bottom thickening decrease is tangent to the flat bottom, and the minimum thickness of the corner reinforcement area is the sum of the structural thickness of the cylinder and the head.

3. Support:

(1) The number of saddle supports of horizontal storage tank shall not be less than two, and saddle can also be made of steel, cast iron, concrete or hand pasted fiberglass

(2) The wrap angle of saddle shall not be less than 120 °. The saddle arc shall coincide with the outer wall of storage tank

(3) The distance between any two saddles shall not be greater than 1.5 times the nominal diameter of the cylinder

(4) Flat bottom storage tank adopts flat concrete foundation. Soft cushion or 200mm thick sand cushion on the support

(5) Glass fiber reinforced plastic or resin concrete legs can be used for the storage tank with ellipsoid lower head. The shape of legs and the cushion of glass cylinder should be consistent

(6) Glass steel ring ribs or steel lifting lugs can be added at the connection between the tank bottom and the leg support.

4. Strengthen assistance:

(1) According to the length diameter ratio of the horizontal storage tank, the strengthening AIDS should be selected reasonably, which can be set inside or outside the tank. The saddle part shall be provided with thickened reinforcing AIDS, whose thickness shall not be less than 2 / 1 of the wall thickness and width shall not be less than 1.3 times of the support width.

(2) The open edge of vertical storage tank without top cover shall have horizontal reinforcing rib.

(3) The reinforcing rib is alternately wound on the cylinder with short cutting felt and cloth, and the outer roving is wrapped and compacted. The stiffener can also be a composite of other materials.

5. Exhaust pipe and overflow pipe:

(1) The upper part of the storage tank shall be provided with an exhaust pipe which is freely connected with the atmosphere. The minimum diameter of exhaust pipe shall be larger than that of inlet and outlet pipe.

(2) The storage tank shall be provided with overflow pipe whose diameter shall be larger than the diameter of the feed pipe.

6. Anchorage device:

(1) During the installation and operation of the storage tank, especially the parallel bottom storage tank, it must be equipped with anchorage device fixed on the foundation.

(2) The anchoring device is not fixed on the storage tank.

7. Softening:

(1) The softened water tank is a soft water container which is stored after softening treatment, and its production is the same as the general water supply tank. When the ion exchanger is used to soften the water, the flow rate of the raw water should not be too large in the softening process, and the softened water cannot be produced in the regeneration process after the failure of the exchanger. Therefore, it needs to be stored in the water tank and extracted at any time.

(2) The softened water tank is the softened water for the system, which comes out from the resin exchange tank and enters the softened water tank, and then enters the system by the make-up water pump. Softened water tank is to soften the common hard water by electronic means. Its purpose is to minimize the scale produced by air conditioning pipes, because if there is scale on the pipe wall, it will reduce the efficiency of refrigeration (heat). Especially in winter, it needs to be softened.

It is widely used to soften the make-up water of steam boiler, hot water boiler, exchanger, evaporation condenser, air conditioner, direct fired machine and other systems. It can also be used in hotels, restaurants, office buildings, apartments, home and other domestic water treatment and food, beverage, wine, laundry, printing and dyeing, chemical industry, medicine

And other industries.

7、 Equipment features:

◇ automation of water softening process:

The equipment realizes the automation of ion exchange and resin regeneration process through the program control device.

◇ efficient:

The design of the water softener is reasonable, so that the effective exchange capacity of the resin can be brought into full play.

◇ provincial labor:

It is easy to install without special personnel.

◇ non toxic:

The valve body is lead-fre3E

2、 Specification and model: hdnyc-10t

3、 Equipment brand: Wenzhou Haineng wzhdn

4、 Product Description:

Due to the variety of raw water and the complexity of its composition, according to the requirements of the raw water quality and the recovery rate of RO system and other main process design parameters, the appropriate pretreatment process system is selected to reduce the fouling and scaling of RO membrane and prevent the decrease of the desalination rate and water production rate of RO membrane, especially for the current shortage of water sources and the deterioration of water quality, a correct pretreatment is selected The system will directly affect the function of the whole water treatment system. as everyone knows. The failure of RO system is mostly caused by the incomplete function of pretreatment system. In order to ensure the normal reverse osmosis process, the raw water must be treated strictly. Purpose of pretreatment of RO system:

① Remove suspended solids and reduce turbidity;

② Control the growth of microorganisms;

③ To inhibit and control the deposition of micro dissolved salt;

④ Adjustment of inlet water temperature and pH;

⑤ Removal of organic matter;

⑥ Precipitation control of metal oxides and silicon. 　

5. Technical requirements:

1. Tank:

(1) It is usually composed of four layers: inner surface layer, inner layer, strength layer and outer surface layer. Other layered structures can be adopted according to the requirements; the wall thickness of the tank can be changed according to the design requirements.

(2) The resin content of the surface layer and the inner layer of the inner layer of the cylinder varies according to the storage medium.

(3) Cone angle of inner wall is more than 1 °

(4) Under loading conditions, the allowable circumferential strain of tank wall shall not exceed 0.1%

(5) For the filament winding layer, when the spiral winding angle is 80 °, the axial tensile strength shall not be less than 15MPa

2. Head:

(1) The head of vertical storage tank can be ellipsoid, flat and conical, and the upper and lower heads can also be combined in different forms. The head of horizontal storage tank is oval.

(2) The strength layer of the head is mainly spray and hand paste, supplemented by winding envelope: when laying the surface felt, short cut primary color felt and roving cloth, the joints between layers shall be staggered, the width shall not be less than 60mm, the tower connection width shall be 30mm, and the resin quality content shall not be less than 40%

(3) When the vertical storage tank is flat, the radius of the bottom corner shall not be less than 38mm, the thickness of the bottom thickening decrease is tangent to the flat bottom, and the minimum thickness of the corner reinforcement area is the sum of the structural thickness of the cylinder and the head.

3. Support:

(1) The number of saddle supports of horizontal storage tank shall not be less than two, and saddle can also be made of steel, cast iron, concrete or hand pasted fiberglass

(2) The wrap angle of saddle shall not be less than 120 °. The saddle arc shall coincide with the outer wall of storage tank

(3) The distance between any two saddles shall not be greater than 1.5 times the nominal diameter of the cylinder

(4) Flat bottom storage tank adopts flat concrete foundation. Soft cushion or 200mm thick sand cushion on the support

(5) Glass fiber reinforced plastic or resin concrete legs can be used for the storage tank with ellipsoid lower head. The shape of legs and the cushion of glass cylinder should be consistent

(6) Glass steel ring ribs or steel lifting lugs can be added at the connection between the tank bottom and the leg support.

4. Strengthen assistance:

(1) According to the length diameter ratio of the horizontal storage tank, the strengthening AIDS should be selected reasonably, which can be set inside or outside the tank. The saddle part shall be provided with thickened reinforcing AIDS, whose thickness shall not be less than 2 / 1 of the wall thickness and width shall not be less than 1.3 times of the support width.

(2) The open edge of vertical storage tank without top cover shall have horizontal reinforcing rib.

(3) The reinforcing rib is alternately wound on the cylinder with short cutting felt and cloth, and the outer roving is wrapped and compacted. The stiffener can also be a composite of other materials.

5. Exhaust pipe and overflow pipe:

(1) The upper part of the storage tank shall be provided with an exhaust pipe which is freely connected with the atmosphere. The minimum diameter of exhaust pipe shall be larger than that of inlet and outlet pipe.

(2) The storage tank shall be provided with overflow pipe whose diameter shall be larger than the diameter of the feed pipe.

6. Anchorage device:

(1) During the installation and operation of the storage tank, especially the parallel bottom storage tank, it must be equipped with anchorage device fixed on the foundation.

(2) The anchoring device is not fixed on the storage tank.

7. Softening:

(1) The softened water tank is a soft water container which is stored after softening treatment, and its production is the same as the general water supply tank. When the ion exchanger is used to soften the water, the flow rate of the raw water should not be too large in the softening process, and the softened water cannot be produced in the regeneration process after the failure of the exchanger. Therefore, it needs to be stored in the water tank and extracted at any time.

(2) The softened water tank is the softened water for the system, which comes out from the resin exchange tank and enters the softened water tank, and then enters the system by the make-up water pump. Softened water tank is to soften the common hard water by electronic means. Its purpose is to minimize the scale produced by air conditioning pipes, because if there is scale on the pipe wall, it will reduce the efficiency of refrigeration (heat). Especially in winter, it needs to be softened.

It is widely used to soften the make-up water of steam boiler, hot water boiler, exchanger, evaporation condenser, air conditioner, direct fired machine and other systems. It can also be used in hotels, restaurants, office buildings, apartments, home and other domestic water treatment and food, beverage, wine, laundry, printing and dyeing, chemical industry, medicine

And other industries.

7、 Equipment features:

◇ automation of water softening process:

The equipment realizes the automation of ion exchange and resin regeneration process through the program control device.

◇ efficient:

The design of the water softener is reasonable, so that the effective exchange capacity of the resin can be brought into full play.

◇ provincial labor:

It is easy to install without special personnel.

◇ non toxic:

The valve body is lead-fre3E

2、 Specification and model: hdnyc-10t

3、 Equipment brand: Wenzhou Haineng wzhdn

4、 Product Description:

Due to the variety of raw water and the complexity of its composition, according to the requirements of the raw water quality and the recovery rate of RO system and other main process design parameters, the appropriate pretreatment process system is selected to reduce the fouling and scaling of RO membrane and prevent the decrease of the desalination rate and water production rate of RO membrane, especially for the current shortage of water sources and the deterioration of water quality, a correct pretreatment is selected The system will directly affect the function of the whole water treatment system. as everyone knows. The failure of RO system is mostly caused by the incomplete function of pretreatment system. In order to ensure the normal reverse osmosis process, the raw water must be treated strictly. Purpose of pretreatment of RO system:

① Remove suspended solids and reduce turbidity;

② Control the growth of microorganisms;

③ To inhibit and control the deposition of micro dissolved salt;

④ Adjustment of inlet water temperature and pH;

⑤ Removal of organic matter;

⑥ Precipitation control of metal oxides and silicon. 　

5. Technical requirements:

1. Tank:

(1) It is usually composed of four layers: inner surface layer, inner layer, strength layer and outer surface layer. Other layered structures can be adopted according to the requirements; the wall thickness of the tank can be changed according to the design requirements.

(2) The resin content of the surface layer and the inner layer of the inner layer of the cylinder varies according to the storage medium.

(3) Cone angle of inner wall is more than 1 °

(4) Under loading conditions, the allowable circumferential strain of tank wall shall not exceed 0.1%

(5) For the filament winding layer, when the spiral winding angle is 80 °, the axial tensile strength shall not be less than 15MPa

2. Head:

(1) The head of vertical storage tank can be ellipsoid, flat and conical, and the upper and lower heads can also be combined in different forms. The head of horizontal storage tank is oval.

(2) The strength layer of the head is mainly spray and hand paste, supplemented by winding envelope: when laying the surface felt, short cut primary color felt and roving cloth, the joints between layers shall be staggered, the width shall not be less than 60mm, the tower connection width shall be 30mm, and the resin quality content shall not be less than 40%

(3) When the vertical storage tank is flat, the radius of the bottom corner shall not be less than 38mm, the thickness of the bottom thickening decrease is tangent to the flat bottom, and the minimum thickness of the corner reinforcement area is the sum of the structural thickness of the cylinder and the head.

3. Support:

(1) The number of saddle supports of horizontal storage tank shall not be less than two, and saddle can also be made of steel, cast iron, concrete or hand pasted fiberglass

(2) The wrap angle of saddle shall not be less than 120 °. The saddle arc shall coincide with the outer wall of storage tank

(3) The distance between any two saddles shall not be greater than 1.5 times the nominal diameter of the cylinder

(4) Flat bottom storage tank adopts flat concrete foundation. Soft cushion or 200mm thick sand cushion on the support

(5) Glass fiber reinforced plastic or resin concrete legs can be used for the storage tank with ellipsoid lower head. The shape of legs and the cushion of glass cylinder should be consistent

(6) Glass steel ring ribs or steel lifting lugs can be added at the connection between the tank bottom and the leg support.

4. Strengthen assistance:

(1) According to the length diameter ratio of the horizontal storage tank, the strengthening AIDS should be selected reasonably, which can be set inside or outside the tank. The saddle part shall be provided with thickened reinforcing AIDS, whose thickness shall not be less than 2 / 1 of the wall thickness and width shall not be less than 1.3 times of the support width.

(2) The open edge of vertical storage tank without top cover shall have horizontal reinforcing rib.

(3) The reinforcing rib is alternately wound on the cylinder with short cutting felt and cloth, and the outer roving is wrapped and compacted. The stiffener can also be a composite of other materials.

5. Exhaust pipe and overflow pipe:

(1) The upper part of the storage tank shall be provided with an exhaust pipe which is freely connected with the atmosphere. The minimum diameter of exhaust pipe shall be larger than that of inlet and outlet pipe.

(2) The storage tank shall be provided with overflow pipe whose diameter shall be larger than the diameter of the feed pipe.

6. Anchorage device:

(1) During the installation and operation of the storage tank, especially the parallel bottom storage tank, it must be equipped with anchorage device fixed on the foundation.

(2) The anchoring device is not fixed on the storage tank.

7. Softening:

(1) The softened water tank is a soft water container which is stored after softening treatment, and its production is the same as the general water supply tank. When the ion exchanger is used to soften the water, the flow rate of the raw water should not be too large in the softening process, and the softened water cannot be produced in the regeneration process after the failure of the exchanger. Therefore, it needs to be stored in the water tank and extracted at any time.

(2) The softened water tank is the softened water for the system, which comes out from the resin exchange tank and enters the softened water tank, and then enters the system by the make-up water pump. Softened water tank is to soften the common hard water by electronic means. Its purpose is to minimize the scale produced by air conditioning pipes, because if there is scale on the pipe wall, it will reduce the efficiency of refrigeration (heat). Especially in winter, it needs to be softened.

It is widely used to soften the make-up water of steam boiler, hot water boiler, exchanger, evaporation condenser, air conditioner, direct fired machine and other systems. It can also be used in hotels, restaurants, office buildings, apartments, home and other domestic water treatment and food, beverage, wine, laundry, printing and dyeing, chemical industry, medicine

And other industries.

7、 Equipment features:

◇ automation of water softening process:

The equipment realizes the automation of ion exchange and resin regeneration process through the program control device.

◇ efficient:

The design of the water softener is reasonable, so that the effective exchange capacity of the resin can be brought into full play.

◇ provincial labor:

It is easy to install without special personnel.

◇ non toxic:

The valve body is lead-fre3E

2、 Specification and model: hdnyc-10t

3、 Equipment brand: Wenzhou Haineng wzhdn

4、 Product Description:

Due to the variety of raw water and the complexity of its composition, according to the requirements of the raw water quality and the recovery rate of RO system and other main process design parameters, the appropriate pretreatment process system is selected to reduce the fouling and scaling of RO membrane and prevent the decrease of the desalination rate and water production rate of RO membrane, especially for the current shortage of water sources and the deterioration of water quality, a correct pretreatment is selected The system will directly affect the function of the whole water treatment system. as everyone knows. The failure of RO system is mostly caused by the incomplete function of pretreatment system. In order to ensure the normal reverse osmosis process, the raw water must be treated strictly. Purpose of pretreatment of RO system:

① Remove suspended solids and reduce turbidity;

② Control the growth of microorganisms;

③ To inhibit and control the deposition of micro dissolved salt;

④ Adjustment of inlet water temperature and pH;

⑤ Removal of organic matter;

⑥ Precipitation control of metal oxides and silicon. 　

5. Technical requirements:

1. Tank:

(1) It is usually composed of four layers: inner surface layer, inner layer, strength layer and outer surface layer. Other layered structures can be adopted according to the requirements; the wall thickness of the tank can be changed according to the design requirements.

(2) The resin content of the surface layer and the inner layer of the inner layer of the cylinder varies according to the storage medium.

(3) Cone angle of inner wall is more than 1 °

(4) Under loading conditions, the allowable circumferential strain of tank wall shall not exceed 0.1%

(5) For the filament winding layer, when the spiral winding angle is 80 °, the axial tensile strength shall not be less than 15MPa

2. Head:

(1) The head of vertical storage tank can be ellipsoid, flat and conical, and the upper and lower heads can also be combined in different forms. The head of horizontal storage tank is oval.

(2) The strength layer of the head is mainly spray and hand paste, supplemented by winding envelope: when laying the surface felt, short cut primary color felt and roving cloth, the joints between layers shall be staggered, the width shall not be less than 60mm, the tower connection width shall be 30mm, and the resin quality content shall not be less than 40%

(3) When the vertical storage tank is flat, the radius of the bottom corner shall not be less than 38mm, the thickness of the bottom thickening decrease is tangent to the flat bottom, and the minimum thickness of the corner reinforcement area is the sum of the structural thickness of the cylinder and the head.

3. Support:

(1) The number of saddle supports of horizontal storage tank shall not be less than two, and saddle can also be made of steel, cast iron, concrete or hand pasted fiberglass

(2) The wrap angle of saddle shall not be less than 120 °. The saddle arc shall coincide with the outer wall of storage tank

(3) The distance between any two saddles shall not be greater than 1.5 times the nominal diameter of the cylinder

(4) Flat bottom storage tank adopts flat concrete foundation. Soft cushion or 200mm thick sand cushion on the support

(5) Glass fiber reinforced plastic or resin concrete legs can be used for the storage tank with ellipsoid lower head. The shape of legs and the cushion of glass cylinder should be consistent

(6) Glass steel ring ribs or steel lifting lugs can be added at the connection between the tank bottom and the leg support.

4. Strengthen assistan